Boyd Lighting / Mirrors with Light / Volterra Illuminated LED 10808/10809

Rectangular mirror framed with illuminated hand-cut alabaster that emits a warm ambient light. Available in two sizes. Designed by Doyle Crosby. There will be some variation in the color and veining of alabaster.

art. 10808 Volterra Illuminated Mirror (Small)

Width: cm 77.5 / inch 30.5"

Height: cm 108 / inch 42.62"

Projection: cm 7 / inch 2.75"

Net Weight: 110 lbs / 49.9 kg

Performance: 32 watts ~1200 lumens.

art. 10809 Volterra Illuminated Mirror (Large)

Width: cm 92.7 / inch 36.5"

Height: cm 123,2 / inch 48.5"

Projection: cm 7 / inch 2.75"

Net Weight: 173 lbs / 78.5 kg

Performance: 40 watts ~1500 lumens

Color Temperature: 2700°k - 3000°k, 90+ CRI

Material: Brass, Alabaster.

*The LED lamps standard in this fixture can be dimmed with ELV; or MLV; or 0-10v low-voltage dimming controls and wiring.

Universal 120v-277v. Lamp included with fixture.

**There will be variations in color and veining of alabaster.

Product Safety Assurance

All Boyd products have been tested and found in compliance by Underwriters Laboratory (UL) or an equivalent nationally recognized testing laboratory. Damp location fixtures are suitable for installation in: interior locations protected from weather but subject to moderate degrees of moisture, such as bathrooms; or protected locations under canopies, marquees and roofed open porches. Wet location fixtures are suitable for installation where the fixture is subject to saturation with water or other liquids, or where the fixture is mounted in an unprotected location and directly subjected to the weather.

Canadian Standards Certification (CSA) - Many products are UL certified to meet CSA standards. Please contact to clarify for details.

Americans with Disabilities Act (ADA)

Some wall sconces comply with the ADA requirements for public accessibility at any mounting height. Others must be mounted at minimum mounting heights to comply.